Chiron Technology IRIS 8xx Series Installationsanleitung PDF herunterladen (Seite 16)

Iris Management Suite

Technical Guide V1.7C 4/11/07

8 Sets the account

number used for

reporting system events

System events, which are not dialler specific, such as

dialler link fail are reported to the ARC on this account

number.

9 Dialler link IP address This is the IP address that will be sent to any dialler that

is told to use this Polling Engine as its main or backup. If

the Polling Engine sits behind an address translating

gateway or firewall, this must be the ‘public’ IP address

on the other side of the gateway.

Note – the facility to validate this address by making a

test call to the address entered is automatically offered.

Caution – it is vital that this address is correct or

diallers may not be able to communicate with the

system as required.

10 To tell which diallers to

accept polls from

Normally set to ‘Own Diallers’, i.e. diallers for which this

is the main Polling Engine, so that polls overdues are

only reported to the ARC from one Polling Engine. This

prevents possible confusion in the ARC if a dialler

temporarily polls into its backup Polling Engine due to

some transient IP network problem.

In the event of the main Polling Engine completely failing,

this can be set to ‘All Diallers’ to ensure that the Backup

Polling Engine now reports any poll overdues and keeps

the ARC updated.

11 Determines what is

shown in the Polling

Engine monitor window

‘All’ selects everything. ‘Normal’ prevents routine events

being displayed.

12 Exit options Remember that any changes will not be saved unless the

correct option is selected.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 36 37

Keine Kommentare

Chiron Technology IRIS 8xx Series Installationsanleitung Seite 16